Analysis of surface shovel disc plow deep loosening machine

1. Structure and design features

Curved surface shovel design: Adopting an all-round curved surface shovel with adjustable soil entry angle, effectively reducing power consumption and improving soil loosening effect.

Disc plow frame: Drawing on the rolling characteristics of disc plows and combining with deep loosening requirements, a double beam frame or power driven disc structure is adopted to reduce tillage resistance and minimize grass entanglement problems.

Modular configuration: Supports flexible adjustment of the number of deep loosening shovels (such as 2-9 teeth), with a tooth spacing of more than 50cm, to adapt to different soil conditions and operating standards.

2. Job characteristics

Deep loosening depth: Depending on different shovel types, the deep loosening depth can reach 30-50cm, significantly breaking through the plow bottom layer and improving soil permeability and air permeability.

Efficient soil crushing and compaction: equipped with wolf toothed compaction rollers or soil crushing devices to achieve integrated operations of soil crushing, ridging, and compaction, reducing subsequent cultivation steps.

Protective design: using overload protection bolts or hydraulic self-adjusting system to avoid damage to the machinery from hard obstacles.

3. Applicable scenarios and advantages

Soil improvement: suitable for farmland with severe compaction, restoring soil structure through deep loosening, improving water storage and moisture retention capacity, especially suitable for dryland agricultural areas.

Multifunctionality: It can be paired with different shovel types to complete tasks such as tillage, weeding, and stubble removal, and is suitable for various crops such as corn, cotton, and soybeans.

Energy saving and efficient: The rolling disc structure reduces friction resistance and energy consumption, and the operating speed can reach over 7 kilometers per hour.

4. Precautions

Power matching: A high-power tractor (such as 50 horsepower or more) should be used to ensure operational efficiency and avoid insufficient power leading to substandard deep loosening depth.

Maintenance requirements: Regularly inspect the wear of the deep loosening shovel, replace overload protection bolts, and maintain lubrication of the disc bearings to extend their service life.

Note: The above information integrates mainstream product designs and technical parameters, and actual selection needs to be based on specific soil types and operational requirements.